At present, more than 90% of drivers use winches to recover stuck cars.
Winches are effective equipment used for rescuing immobile cars stuck in a ditch, gutter, or mound of snow.
Besides, this equipment is pretty user-friendly. The steps involved in winching are pretty straightforward.
Nevertheless, it is essential to have automobile knowledge of how winches operate.
One of the things you’ll need to do when running a winch is attaching the winch cable or rope to the winch.
Although this process is relatively straightforward, ensure that you correctly avoid any problems during the winching process.
You’ll also have to know and understand the type of winch you have so that you can attach it to the winch effectively.
In this article, we look at the detailed process of attaching a winch rope to the winch.
Step one – Wear protective garments and gloves
Before you start using an electric winch, ensure you have the right outfit. One of the things you should never forget to wear is protective gloves.
But why? First, the winching process can be quite messy. Thus, you don’t want to winch your car when wearing a white trouser or shirt.
Second, winching places a lot of stress on the hands.
So, your hand may encounter a lot of friction during this process. Consequently, bruises, among other hand injuries, can be the result of winching.
It does not matter how experienced you are. Always put on heavy-duty gloves and protective gear.
Step two – remove the old cable
First, you have to get rid of the existing cable present in your winch. While doing this, make sure the clutch is on freewheel mode.
Remove the existing cable carefully to avoid any accidents. However, ensure that you are not removing the old winch cable with the hook in place.
One simple way to get rid of the old cable is by using your hand.
Using your hands prevents accidental damages. Again, note that it also depends on the type of winch cable you have.
For instance, if you have a steel cable, a screwdriver may be necessary. On the flip side, synthetic winch cables may only require you to untie a knot.
But you have to be very careful when untying a synthetic knot. This way, you will be able to prevent any damages.
After removing the old cable, find a suitable disposal point for the cable. Avoid damping winch cables anywhere.
They can be dangerous to both human beings and the environment.
Step three – Attach the new cable on the drum
Ensure that you know how the old winch cable got installed before you start attaching the new cable.
Keep in mind that you have to attach the new winch cable the same way the old one got installed. Otherwise, the winch won’t work effectively.
For example, if you used a screwdriver to mount the old winch cable, you have to use a screwdriver to fix the new cable.
On the other hand, suppose you mounted the old cable using a metal lock bead, do the same with the new cable.
Likewise, if your old synthetic cable was firmly secured by a simple knot, do the same. It would be best if you captured a picture or video of how the initial knot got tied.
This way, you’ll be able to tie the knot correctly.
Attaching the winch cable to the winch
When mounting the winch cable, ensure it passes over the upper section of the winch. Also, it should pass the back of the winch as well as encompass the spool.
Do not let the rope overlap. Simply put, there should only be distinctive single layers when running the winch cable around the spool.
Do this repeatedly until the winch rope is complete. So, always purchase the correct winch type and size that suits your requirements.
Moreover, be very careful when attaching the winch rope. Do the process gently to avoid injuring your hands or fingers.
Once you complete attaching the winch cable, return and fix all parts you might have removed during the process.
Forgetting to return one of the parts can lead to malfunctioning of the winch.
Safety measures to observe
- Never start attaching a winch cable to the winch if you have not read and understood the instruction manual completely. You might have to do one or two things before you start winching.
- Take your time when attaching the winch cable to the winch. Although this might sound odd, do not be in a hurry, especially when spooling the winch cable. You might end up with an ineffective winch that won’t get the job done.
- Do not forget to wear your heavy-duty gloves. Remember, you are dealing with a winch cable here. Steel cables can actually riddle or puncture your skin. Synthetic cables are also not so friendly on the hands. So, ensure you wear gloves that can protect your skin.
- Always purchase the correct winch rope for the winch. Ensure it is compatible with the winch. Also, ensure that the winch rope is strong enough. Often, car experts recommend buying a winch that is twice the strength of the winch. This way, it can withstand extreme pressure.
The bottom line
From this article, it is clear that attaching a winch cable to a winch is not that complex. In summary, attaching a winch rope to a winch requires you to remove the old cable first.
Then, encompass the new cable around the winch. But you have to install the new cable in the same way the old one got installed.
Failure to do so would be a recipe for disaster. Additionally, you have to observe all the safety practices when attaching a winch cable to a winch.
Always wear heavy-duty gloves and the right protective garments.
Ultimately, it is safe to conclude that attaching a winch cable to a winch is a relatively straightforward procedure.
You need not hire a car expert for this. But if you are not sure of the process, it would be best to hire an expert mechanic.