How Do I Keep My Winch Cable From Rusting?

Winch steel cables are well known to carry a wide range of benefits.

However, like most products, winch cables have some downsides. One of the major drawbacks of a winch steel cable is its vulnerability to rusting.

Come to think about it. Winch cables get exposed to moisture at times, especially when recovering a car from mud or snow. The number one cause of rust is moisture.

So, if not dried properly, winch steel cables easily rust.

Since it may be challenging to deal with rust in winch cables, you would rather avoid the problem.

There are different techniques used to prevent rusting nowadays.

But the one that stands out the most is oiling and incorporating anti-rust primers.

There are various types of paint you can use to prevent the formation of rust on your winch steel cables.

Prevention of rust on winch cables

Implement the practice of oiling the winch connectors to prevent the formation of rust and make the winch faster.

The connectors of the winch cable are often located on the sides and corners. It would help if you used dielectric grease for this. Apply a layer of grease on the winch.

Doing this will help you avoid rust. So, yes, it is permissible to oil a winch cable to prevent rusting.

The frequency of doing this largely depends on the condition of the winch cable.

How do you service and maintain a winch?

There are numerous techniques you can incorporate to service and maintain your winch.

Maintaining a winch not only boosts its efficiency but also promotes its longevity.

Thus, you end up saving thousands of dollars that you could have used in winch repairs in the long run.

Moreover, servicing your winch will also protect it from common problems like rusting and slow performance.

So, if you own a winch, consider servicing it from time to time, depending on the frequency of usage.

A detailed process on how to service a winch

Prepare beforehand:

Before you begin servicing a winch, you have to have the right tools and equipment.

Otherwise, you would consume more time and effort during the process.

Getting the right tools and equipment requires you to understand the type of winch you have.

Sometimes, manufacturers usually outline the process to service the winch on the manual.

So, you might actually spare some time to read and understand the manual.

Another thing you have to do during the preparation process is to wrap the winch with towels.

Doing this protects the winch deck and keeps the winch instant.

Moreover, you have to wear protective gloves. Heavy-duty gloves will work perfectly fine for this process.

They work to protect the palm of your hands from any injuries. Besides, servicing a winch can be relatively messy.

Thus, you don’t want your hands to resemble coal at the end of the process. Gloves will protect you from this.

Dismantle the parts systematically:

You have to disconnect several parts of the winch during servicing. When doing this, be very careful.

Find a suitable spot to place the dismantled components of the winch. Failure to do so might make you lose one or two parts.

Place the parts systematically so that it can be easy for you to return the parts after servicing.

Also, store them well to prevent any damages. Pull apart each piece carefully so that they don’t fall to the ground. Remember, you might actually fail to recall how many parts you ought to have. Therefore, it would be best to do this process carefully to avoid dropping any components.

Degrease and inspect the winch:

After dismantling all the parts of the winch, evaluate and clean it. Due to frequent oiling, the winch might actually be dirty from a buildup of grease.

You can degrease the winch using de-greasing agents and mineral spirits. Even so, ensure that the degreasing agents do not react adversely with the winch.

Suppose your degreasing agents contain gasoline; they may destroy the plastic components of the winch.

Consult your manufacturer before buying any degreasing agent. Also, ensure that your degreasing agent is specially designed for winches.

When evaluating the winch, check for any damages. Occasionally, car mechanics may identify cracked or coiled gears.

Once you notice such issues, please do your best to repair them immediately. During this process, identify any rusts on the winch.

Then use anti-rust agents to treat and prevent the formation of rust. If some parts are heavily eroded, it would be best to replace them.

All in all, check if the winch is in good shape and repair any issues present.

Reassemble your winch:

After the winch is clean and in good shape, you can start fixing the winch back together.

Take the dismantled parts and start putting them back to place. While doing this, oil each component as you fix them.

This way, you will prevent corrosion of the winch. All you have to do is pour grease into a small or medium-sized container (it depends on the size of your winch).

Ensure every part is in its rightful position so that the winch works effectively at the end of the day.

Conduct a test run:

Indisputably, you have to find out if the winch is still functioning correctly.

So, after putting all the components back together, you ought to conduct a test run.

So, switch on the winch and see if it is running properly and smoothly. If it can’t start, then there could be a problem with the fixing.

How often should you service your winches?

It is important to make sure you service your winches from time to time.

But it depends on how often you use the winch. Always check if the winch is in good shape after every use.

Use clean water to flush your winches often. Also, you can decide to randomly check on the condition of every part of the winch.

In conclusion

Winch cables are often prone to rusting due to frequent exposure to moisture.

So, always do our best to protect the winch cables from rusting.

You can do this by oiling the winch cable or applying anti-rusting agents to the cable.

Also, make time to service the winch. Servicing the winch helps you boost its durability and effectiveness.

Leave a Comment